КаталогКаталог
 
ПроизводительПроизводитель
 
0 товар(ов):     0 руб.
 
НовостиНовости

[2018-06-18]
Кованные поршни JE Pistons по хорошим ценам!
далее...


[2016-02-22]
Добавили раздел со скидками
далее...


[2013-10-23]
Товары по каталогам Sandtler и ISA-Racing
далее...


Все новости
 
СтатьиСтатьи

[2018-04-06]
Базовые рекомендации при установке топливного насоса повышенной производительности
далее...


[2016-01-17]
Установка КПП Nissan 240SX на вазовский мотор
далее...


[2014-11-06]
Установка продольной кпп от BMW в классику (2101-2107) с двигателем 2101 или 2112
далее...


[2014-01-27]
Разработка дюралевых клапанных тарелок и расчет их на прочность методом конечных элементов.
далее...


Все статьи
 

AEM FIC 8 Fuel Ignition Controller 30-1930

AEM FIC 8 Fuel Ignition Controller 30-1930
увеличить...
Производитель:  AEM
 
Наименование:AEM FIC 8 Fuel Ignition Controller 30-1930

 
Артикул: 30-1930
 
Цена с учётом выбранных опций: 22 310 руб.
Наличие:В наличии
 
Старая цена: 40 337 руб.
Цена:22 310 руб.
  
Вы экономите:18 027 руб. (45%)

Product Description

AEM 30-1930 Universal Fuel/Ignition Controller 8 Channel

AEM’s F/IC 8 is a PC-programmable piggy back controller that allows users to retard timing and add fuel to virtually any 4 and 6 cylinder engine - even on variable cam timing engines (VTEC, iVTEC, VVTi, MiVEC, etc). The F/IC works in parallel with the factory ECU and allows vehicles with CAN-BUS to retain the full functionality of the climate controls, cruise control, dash, and other components of the network.

If you have boosted your factory engine, or plan to in the future, the AEM F/IC is an affordable alternative to a stand alone engine management system that still allows for powerful tuning. The F/IC can work with either factory or larger aftermarket injectors, and can even clamp a factory MAF so you can run boost with your stock mass air flow sensor. This allows someone with an OBD-II vehicle to easily and safely add a turbo or supercharger to their vehicle yet still maintain every day driveability.


Features:


  • Works with latest OBD-II race vehicles including those with variable valve timing
  • Variable valve timing controller based on engine RPM and load
  • Injector inputs with simulated injector load used when remapping OEM injectors
  • Injector controller for either remapping of ECU output (+/- 100% trim) or as a stand alone extra injector driver
  • 21x17 maps with configurable load and RPM breakpoints
  • Analog in/out for remapping/clamping MAF
  • F/IC can draw power from PC USB for quick and easy calibration changes - even when it's out of the car!
  • On board 64K datalogger
  • Drives high or low-impedance injectors with use of Peak & Hold Injector Driver Box
  • Up to five channels of timing retard
  • On board 41PSIA (25PSI boost) manifold pressure sensor

Note: The 30-1930 is a Universal Fuel/Ignition Controller and fits most 8 cylinder applications

 

Оставить Комментарий
Ваше имя


Ваш вопрос / комментарий

Защитный код:

Защитный код